Series AG-260 Side-Entry Agitator
VQ-AG260
Agitator and mixer, power 1.5 to 30 kW, vessels 5 to 300 m³.
- POWER
- 1.5 to 30 kW
- VESSELS
- 5 to 300 m³
- SPEED
- 180 to 750 rpm
- MOUNTING
- DN150 to DN250 side flange
Why it is specified
Sized on the process result rather than on the motor: blend time, solids suspension or heat transfer, whichever the duty actually is. The shaft and impellers are selected together so the critical speed stays clear of the running speed.
Typical applications
- Blending and homogenising
- Neutralisation tanks
- Solids suspension
- Storage tank roll-over
Options and executions
- Double mechanical seal with a barrier pot
- Folding impeller for manway installation
- Mixing calculation issued with the quotation
- Variable speed drive
The full table.
Figures cover the whole series. The variant table below narrows them to a part number.
PERFORMANCE
- Motor power
- 1.5 to 30 kW
- Output speed
- 180 to 750 rpm
- Vessel volume
- 5 to 300 m³
- Impeller diameter
- 250 to 700 mm
- Tip speed
- 3.5 to 9 m/s
MATERIALS
- Shaft
- 1.4404 stainless steel, to 900 mm
- Impellers
- 1.4404 three-blade propeller
- Mounting flange
- 1.4301 or carbon steel, machined
- Shaft seal
- Single mechanical, with a shut-off device
CONNECTIONS AND RATINGS
- Mounting
- DN150 to DN250 side flange
- Shaft extension
- 300 to 900 mm
- Vessel pressure
- Atmospheric to 6 bar
- Temperature at the seal
- -10 to +120 °C
- Enclosure
- IP55 motor
Stocked frame sizes.
| PART NUMBER | POWER | MOUNTING | VESSEL | IMPELLERS |
|---|---|---|---|---|
| VQ-AG260-10 | 1.5 kW | DN150 | to 40 m³ | One propeller |
| VQ-AG260-20 | 7.5 kW | DN200 | to 140 m³ | One propeller |
| VQ-AG260-30 | 30 kW | DN250 | to 300 m³ | One propeller |
AG-260, DS-AG-260
The datasheet is issued with the selection rather than downloaded blind, so the figures that arrive are the ones for your duty point. Ask for it with the quotation and it comes back as a PDF.
What is in it
- Selection data and the limits each figure applies at
- Dimensional drawings for every size in the variant table
- Materials of construction and the compatibility notes
- Installation, commissioning and maintenance intervals
- Spare parts list with the part numbers
Elsewhere in the catalogue.
HX-600
Fixed tube sheet shell-and-tube exchanger in stainless steel, for liquid-to-liquid and steam-to-liquid duty on process and utility systems.
AG-350
Flange-mounted top-entry agitator with a helical bevel gear unit and a hydrofoil impeller set, for blending, suspension and heat transfer duty in vessels from 1 to 40 m³.
HE-120
Heat exchanger, surface 0.5 to 90 m², duty 15 kW to 3.2 MW.
HE-180
Heat exchanger, surface 0.2 to 26 m², duty 5 kW to 900 kW.
Quote the AG-260 for your duty.
Send the process data and the line size. The quotation comes back with the selection, the calculation and the lead time on the stocked variants.
Vanteq Industrial is a fictional company created for demonstration purposes. This product does not exist. The specifications, performance figures, materials and datasheet references on this page are illustrative and must not be used to select, size or buy equipment.