2,400 line items, four groups.
Pumps, valves, filtration and process equipment, with the instrumentation, seals and hose that go with them. Filter by category, medium, pressure rating or material, or send us the duty and let an engineer do the selecting.
The filters on this page are part of the design. Nothing is wired to a product database, so the result set does not change.
Start here.
Pumps
Centrifugal, positive displacement and sealless pumps for clean, viscous and aggressive duties, from DN25 to DN300.
Valves
Isolation, control and safety valves in cast iron, carbon steel and stainless, manual or actuated, PN10 to PN40.
Filtration
Bag, cartridge, basket and self-cleaning filtration, with the housings, elements and differential pressure instruments that go with them.
Process Equipment
Heat exchangers, agitators, static mixers, sight glasses and the vessel fittings that finish a skid.
Eight series, with the full specification behind each one.
A real catalogue of this size would run to several hundred rows behind a search. This one publishes eight, each with the specification table, the variant list and the datasheet contents a buyer would actually check.
| PART NUMBER | SERIES | TYPE | GROUP | DUTY |
|---|---|---|---|---|
| VQ-CP150 | CP-150 | End-suction centrifugal pump | Pumps | flow to 450 m³/h, head to 95 m |
| VQ-MD80 | MD-80 | Sealless magnetic drive pump | Pumps | flow to 90 m³/h, head to 55 m |
| VQ-GV200 | GV-200 | Pneumatic globe control valve | Valves | sizes DN15 to DN200, cv 1.6 to 360 |
| VQ-BF300 | BF-300 | Resilient-seated butterfly valve | Valves | sizes DN50 to DN600, rating PN10 and PN16 |
| VQ-FH400 | FH-400 | Single bag filter housing | Filtration | flow to 80 m³/h, rating 1 to 800 micron |
| VQ-CF250 | CF-250 | Multi-cartridge filter housing | Filtration | flow to 55 m³/h, elements 3 to 12 x 30 inch |
| VQ-HX600 | HX-600 | Shell-and-tube heat exchanger | Process Equipment | surface 2 to 60 m², shell 1.4301 stainless steel |
| VQ-AG350 | AG-350 | Top-entry tank agitator | Process Equipment | power 0.37 to 45 kW, vessels 1 to 40 m³ |
Three ranges that finish the line.
They are stocked against the four groups above rather than sold on their own, so they live here instead of on a page with nothing on it.
Instrumentation
Pressure, temperature, level and flow instruments, in the ranges that go with the equipment above: bourdon and diaphragm gauges, diaphragm seals, bimetal and resistance thermometers, magnetic level indicators, electromagnetic and variable area flowmeters. Stocked with the process connection and the fill fluid stated, because a gauge with the wrong seal is a gauge that reads nothing.
Seals and Gaskets
Mechanical seals to EN 12756, cartridge seals, gland packing, and sheet and ring gaskets in graphite, PTFE and aramid fibre. Held against the pump and valve ranges we sell, so a seal can be identified from the pump serial rather than from a drawing nobody can find.
Hose and Fittings
Industrial hose assemblies in PTFE, EPDM and composite, with camlock, DIN 11851 and clamp fittings, made up and pressure tested to the length you give us. Chemical compatibility is checked against the medium before the assembly is cut.
Brand-independent, and saying so.
Vanteq is brand-independent. We hold franchised and non-franchised stock from 38 manufacturer ranges across the four product groups, and we select against the duty point rather than against a supplier agreement. Because this website is a design demonstration for a fictional distributor, no manufacturer is named anywhere on it: a real Vanteq would list its franchises here, with the logos and the territory each one covers.
What you can ask us for.
Datasheets
Every product page carries its datasheet contents and the revision the figures come from. Ask for the full document and it arrives as a PDF with the selection attached.
Selection guides
Four guides, one per product group, covering the data we need from you and the checks we run on it before a selection is issued.
CAD and dimensional data
STEP and DWG models for the stocked frame sizes, issued against the part number once the selection is agreed.
Installation and maintenance
Commissioning checklists, torque tables, seal change procedures and the spare parts list for each series.
Cannot find it in eight products?
The published catalogue is a demonstration. The real one runs to 2,400 lines, and the quickest route into it is a duty point and a telephone call.
Vanteq Industrial is a fictional company created for demonstration purposes. The products, part numbers and specifications shown here are illustrative and do not describe equipment that can be bought. The search and the filters are part of the design and are not connected to a product database.