Series HE-120 Gasketed Plate Heat Exchanger
VQ-HE120
Heat exchanger, surface 0.5 to 90 m², duty 15 kW to 3.2 MW.
- SURFACE
- 0.5 to 90 m²
- DUTY
- 15 kW to 3.2 MW
- DESIGN PRESSURE
- 16 bar
- TEMPERATURE
- -10 to +150 °C
Why it is specified
Quoted against a thermal calculation rather than against an area. The pressure drop on both sides and the fouling allowance that was assumed come with the price, because the assumption is what the argument is usually about.
Typical applications
- District heating substations
- Glycol loop interchange
- Heat recovery between streams
- Process cooling with tower water
Options and executions
- Duplex plates for chloride-bearing water
- Insulation and cladding
- Spare gasket set with the order
- Thermal calculation issued with the quotation
The full table.
Figures cover the whole series. The variant table below narrows them to a part number.
PERFORMANCE
- Heat transfer area
- 0.5 to 90 m²
- Duty
- 15 kW to 3.2 MW
- Flow per side
- 2 to 240 m³/h
- Typical coefficient
- 3,000 to 6,500 W/m²K
- Fouling allowance
- 0.00018 m²K/W each side
MATERIALS
- Heat transfer surface
- 1.4404 pressed plates, 0.5 mm
- Frame
- Carbon steel, painted RAL 7016
- Gaskets or seals
- NBR, EPDM or FKM, clip-on
- Nozzle liners
- 1.4404
CONNECTIONS AND RATINGS
- Nozzles
- DN50 to DN200, EN 1092-1 flanged
- Design pressure
- 16 bar
- Design temperature
- -10 to +150 °C
- Construction
- Gasketed, openable frame
- Cleaning
- Openable for mechanical cleaning
Stocked frame sizes.
| PART NUMBER | SIZE | SURFACE | PLATES OR TUBES | NOZZLES |
|---|---|---|---|---|
| VQ-HE120-10 | Frame 1 | 0.5 to 12 m² | 10 to 80 plates | DN50 |
| VQ-HE120-20 | Frame 2 | 10 to 40 m² | 40 to 180 plates | DN100 |
| VQ-HE120-30 | Frame 3 | 30 to 90 m² | 120 to 400 plates | DN200 |
HE-120, DS-HE-120
The datasheet is issued with the selection rather than downloaded blind, so the figures that arrive are the ones for your duty point. Ask for it with the quotation and it comes back as a PDF.
What is in it
- Selection data and the limits each figure applies at
- Dimensional drawings for every size in the variant table
- Materials of construction and the compatibility notes
- Installation, commissioning and maintenance intervals
- Spare parts list with the part numbers
Elsewhere in the catalogue.
HX-600
Fixed tube sheet shell-and-tube exchanger in stainless steel, for liquid-to-liquid and steam-to-liquid duty on process and utility systems.
AG-350
Flange-mounted top-entry agitator with a helical bevel gear unit and a hydrofoil impeller set, for blending, suspension and heat transfer duty in vessels from 1 to 40 m³.
HE-180
Heat exchanger, surface 0.2 to 26 m², duty 5 kW to 900 kW.
HE-240
Heat exchanger, surface 0.3 to 14 m², duty 8 kW to 420 kW.
Quote the HE-120 for your duty.
Send the process data and the line size. The quotation comes back with the selection, the calculation and the lead time on the stocked variants.
Vanteq Industrial is a fictional company created for demonstration purposes. This product does not exist. The specifications, performance figures, materials and datasheet references on this page are illustrative and must not be used to select, size or buy equipment.