Series HS-440 Hose Test and Inspection Service
VQ-HS440
Hose safety and test equipment, sizes All assemblies in this catalogue, rating Tested at 1.5 times working pressure.
- SIZES
- All assemblies in this catalogue
- RATING
- Tested at 1.5 times working pressure
- STANDARD
- Visual, hydrostatic and continuity
- MATERIAL
- 1.4301
Why it is specified
A hose that lets go under pressure is the one piece of plant that can move. Restraints, tags and test records are quoted with the assembly rather than remembered afterwards.
Typical applications
- Chemical loading arms
- Periodic hose inspection
- Steam hose installations
- Tanker discharge points
Options and executions
- Annual inspection and re-test contract
- Engraved tags with your asset numbers
- Storage racks and reels
- Test certificates issued per assembly
The full table.
Figures cover the whole series. The variant table below narrows them to a part number.
PERFORMANCE
- Working load or pressure
- Tested at 1.5 times working pressure
- Service interval
- Six or twelve months
- Record keeping
- Certificate per assembly, register per site
MATERIALS
- Body or cable
- Not applicable, service item
- Tag
- New tag fitted at each test
CONNECTIONS AND RATINGS
- Sizes
- All assemblies in this catalogue
- Standard
- Visual, hydrostatic and continuity
- Fitting method
- At our works or on your site
- Supply
- Per assembly or per contract
Stocked frame sizes.
| PART NUMBER | SIZE | RATING | FITTING | MATERIAL |
|---|---|---|---|---|
| VQ-HS440-10 | Single assembly | 1.5 times working | At our works | 1.4301 |
| VQ-HS440-20 | Site visit, to 50 assemblies | 1.5 times working | On site | 1.4301 |
| VQ-HS440-30 | Annual contract | 1.5 times working | On site | 1.4301 |
HS-440, DS-HS-440
The datasheet is issued with the selection rather than downloaded blind, so the figures that arrive are the ones for your duty point. Ask for it with the quotation and it comes back as a PDF.
What is in it
- Selection data and the limits each figure applies at
- Dimensional drawings for every size in the variant table
- Materials of construction and the compatibility notes
- Installation, commissioning and maintenance intervals
- Spare parts list with the part numbers
Elsewhere in the catalogue.
HA-120
Hose assembly, bore DN10 to DN100, pressure to 25 bar.
HA-240
Hose assembly, bore DN25 to DN150, pressure to 16 bar.
HA-330
Hose assembly, bore DN50 to DN200, pressure to 14 bar.
HA-420
Hose assembly, bore DN13 to DN50, pressure to 18 bar saturated steam.
Quote the HS-440 for your duty.
Send the process data and the line size. The quotation comes back with the selection, the calculation and the lead time on the stocked variants.
Vanteq Industrial is a fictional company created for demonstration purposes. This product does not exist. The specifications, performance figures, materials and datasheet references on this page are illustrative and must not be used to select, size or buy equipment.