Series HA-420 Steam Hose Assembly
VQ-HA420
Hose assembly, bore DN13 to DN50, pressure to 18 bar saturated steam.
- BORE
- DN13 to DN50
- PRESSURE
- to 18 bar saturated steam
- TEMPERATURE
- -20 to +210 °C
- LINING
- EPDM, steam resistant
Why it is specified
Made up and pressure tested to the length you give us, with the test record in the box. Chemical compatibility is checked against the medium before the assembly is cut, because a hose that fits is not the same as a hose that lasts.
Typical applications
- Chemical transfer
- Food and beverage transfer
- Steam and hot water lines
- Tanker and IBC discharge
Options and executions
- Annual re-test and certification
- Anti-static bonding wire
- Safety whip restraints
- Tagged with a unique assembly number
The full table.
Figures cover the whole series. The variant table below narrows them to a part number.
PERFORMANCE
- Working pressure
- to 18 bar saturated steam
- Burst pressure
- Ten times working pressure
- Bend radius
- Six times the bore
- Vacuum rating
- Not rated for vacuum
- Assembly length
- 1 to 15 m
MATERIALS
- Lining
- EPDM, steam resistant
- Reinforcement
- Two or four steel wire braids
- Cover
- Red EPDM, pin pricked
- Couplings
- Forged carbon steel, crimped
CONNECTIONS AND RATINGS
- Bore sizes
- DN13 to DN50
- End connections
- Safety clamped or crimped steam couplings
- Temperature range
- -20 to +210 °C
- Electrical continuity
- Braid bonded to the couplings
- Testing
- Hydrostatic plus a steam soak test
Stocked frame sizes.
| PART NUMBER | BORE | LENGTH | ENDS | PRESSURE |
|---|---|---|---|---|
| VQ-HA420-10 | DN19 | 3 m | Crimped | to 18 bar saturated steam |
| VQ-HA420-20 | DN25 | 6 m | Crimped | to 18 bar saturated steam |
| VQ-HA420-30 | DN50 | 10 m | Safety clamped | to 18 bar saturated steam |
HA-420, DS-HA-420
The datasheet is issued with the selection rather than downloaded blind, so the figures that arrive are the ones for your duty point. Ask for it with the quotation and it comes back as a PDF.
What is in it
- Selection data and the limits each figure applies at
- Dimensional drawings for every size in the variant table
- Materials of construction and the compatibility notes
- Installation, commissioning and maintenance intervals
- Spare parts list with the part numbers
Elsewhere in the catalogue.
HA-120
Hose assembly, bore DN10 to DN100, pressure to 25 bar.
HA-240
Hose assembly, bore DN25 to DN150, pressure to 16 bar.
HA-330
Hose assembly, bore DN50 to DN200, pressure to 14 bar.
CO-110
Coupling and fitting, sizes DN13 to DN150, standard EN 14420-7, type A to F.
Quote the HA-420 for your duty.
Send the process data and the line size. The quotation comes back with the selection, the calculation and the lead time on the stocked variants.
Vanteq Industrial is a fictional company created for demonstration purposes. This product does not exist. The specifications, performance figures, materials and datasheet references on this page are illustrative and must not be used to select, size or buy equipment.