Series HS-110 Whip Restraint Cable
VQ-HS110
Hose safety and test equipment, sizes DN13 to DN200 hose, rating to 25 bar hose rating.
- SIZES
- DN13 to DN200 hose
- RATING
- to 25 bar hose rating
- STANDARD
- Cable to EN 12385
- MATERIAL
- 1.4401
Why it is specified
A hose that lets go under pressure is the one piece of plant that can move. Restraints, tags and test records are quoted with the assembly rather than remembered afterwards.
Typical applications
- Chemical loading arms
- Periodic hose inspection
- Steam hose installations
- Tanker discharge points
Options and executions
- Annual inspection and re-test contract
- Engraved tags with your asset numbers
- Storage racks and reels
- Test certificates issued per assembly
The full table.
Figures cover the whole series. The variant table below narrows them to a part number.
PERFORMANCE
- Working load or pressure
- to 25 bar hose rating
- Safety factor
- Four to one on the cable
- Service interval
- Inspect at every hose change
- Record keeping
- Length and rating stamped on the ferrule
MATERIALS
- Body or cable
- 1.4401 stainless wire rope
- Fittings
- Swaged eyes with thimbles
- Tag
- Stainless, laser marked
- Finish
- Bright
CONNECTIONS AND RATINGS
- Sizes
- DN13 to DN200 hose
- Standard
- Cable to EN 12385
- Fitting method
- Choker loop around the hose and the fixed point
- Pressure rating
- PN25
- Supply
- Pairs, by hose bore
Stocked frame sizes.
| PART NUMBER | SIZE | RATING | FITTING | MATERIAL |
|---|---|---|---|---|
| VQ-HS110-10 | DN25 to DN50 | to 16 bar | Swaged eyes | 1.4401 |
| VQ-HS110-20 | DN65 to DN100 | to 25 bar | Swaged eyes | 1.4401 |
| VQ-HS110-30 | DN125 to DN200 | to 25 bar | Swaged eyes | 1.4401 |
HS-110, DS-HS-110
The datasheet is issued with the selection rather than downloaded blind, so the figures that arrive are the ones for your duty point. Ask for it with the quotation and it comes back as a PDF.
What is in it
- Selection data and the limits each figure applies at
- Dimensional drawings for every size in the variant table
- Materials of construction and the compatibility notes
- Installation, commissioning and maintenance intervals
- Spare parts list with the part numbers
Elsewhere in the catalogue.
HA-120
Hose assembly, bore DN10 to DN100, pressure to 25 bar.
HA-240
Hose assembly, bore DN25 to DN150, pressure to 16 bar.
HA-330
Hose assembly, bore DN50 to DN200, pressure to 14 bar.
HA-420
Hose assembly, bore DN13 to DN50, pressure to 18 bar saturated steam.
Quote the HS-110 for your duty.
Send the process data and the line size. The quotation comes back with the selection, the calculation and the lead time on the stocked variants.
Vanteq Industrial is a fictional company created for demonstration purposes. This product does not exist. The specifications, performance figures, materials and datasheet references on this page are illustrative and must not be used to select, size or buy equipment.