Series CO-110 Camlock Coupling
VQ-CO110
Coupling and fitting, sizes DN13 to DN150, standard EN 14420-7, type A to F.
- SIZES
- DN13 to DN150
- STANDARD
- EN 14420-7, type A to F
- PRESSURE
- to 16 bar
- MATERIAL
- 1.4408
Why it is specified
Stocked loose as well as swaged, because the coupling that is missing is never the one on the hose. Sizes and standards that match the assemblies in this catalogue, so a replacement end fits the hose that is already on the plant.
Typical applications
- Hygienic line connections
- Tanker and IBC connections
- Temporary process connections
- Washdown and utility points
Options and executions
- Alternative seal materials
- Dust caps and plugs
- Electropolished finish
- Safety locking arms
The full table.
Figures cover the whole series. The variant table below narrows them to a part number.
PERFORMANCE
- Working pressure
- to 16 bar
- Service temperature
- -20 to +180 °C
- Seal type
- Flat gasket in the coupler
- Coupling and uncoupling
- Two cam arms, no tools
MATERIALS
- Body
- 1.4408 stainless steel
- Seal
- EPDM, NBR, FKM or PTFE
- Fasteners
- 1.4401 cam arms and pins
- Finish
- Investment cast, polished
CONNECTIONS AND RATINGS
- Sizes
- DN13 to DN150
- Standard
- EN 14420-7, type A to F
- Hose attachment
- Hose tail, thread or flange
- Pressure rating
- PN16
- Certification
- Pressure tested per batch
Stocked frame sizes.
| PART NUMBER | SIZE | TYPE | SEAL | MATERIAL |
|---|---|---|---|---|
| VQ-CO110-10 | DN25 | Type C coupler | EPDM, NBR, FKM or PTFE | 1.4408 |
| VQ-CO110-20 | DN50 | Type E adaptor | EPDM, NBR, FKM or PTFE | 1.4408 |
| VQ-CO110-30 | DN100 | Type F adaptor | EPDM, NBR, FKM or PTFE | 1.4408 |
CO-110, DS-CO-110
The datasheet is issued with the selection rather than downloaded blind, so the figures that arrive are the ones for your duty point. Ask for it with the quotation and it comes back as a PDF.
What is in it
- Selection data and the limits each figure applies at
- Dimensional drawings for every size in the variant table
- Materials of construction and the compatibility notes
- Installation, commissioning and maintenance intervals
- Spare parts list with the part numbers
Elsewhere in the catalogue.
HA-120
Hose assembly, bore DN10 to DN100, pressure to 25 bar.
HA-240
Hose assembly, bore DN25 to DN150, pressure to 16 bar.
HA-330
Hose assembly, bore DN50 to DN200, pressure to 14 bar.
HA-420
Hose assembly, bore DN13 to DN50, pressure to 18 bar saturated steam.
Quote the CO-110 for your duty.
Send the process data and the line size. The quotation comes back with the selection, the calculation and the lead time on the stocked variants.
Vanteq Industrial is a fictional company created for demonstration purposes. This product does not exist. The specifications, performance figures, materials and datasheet references on this page are illustrative and must not be used to select, size or buy equipment.