Series SS-310 Seal Cooler, Plan 23
VQ-SS310
Seal support system, volume Not applicable, circulating, pressure 25 bar.
- VOLUME
- Not applicable, circulating
- PRESSURE
- 25 bar
- TEMPERATURE
- -20 to +260 °C
- PLAN
- Plan 23, closed circuit
Why it is specified
A double seal without a barrier system is a double seal that fails twice. The pot, the tubing, the cooling coil and the instrumentation are quoted as one assembly against the seal it serves.
Typical applications
- Agitator seal support
- Double seals on aggressive duty
- Hot oil circulation seals
- Hygienic double seals
Options and executions
- Level switch with a contact
- Nitrogen regulator panel
- Pre-piped and tested as an assembly
- Pressure switch with a contact
The full table.
Figures cover the whole series. The variant table below narrows them to a part number.
PERFORMANCE
- Reservoir volume
- Not applicable, circulating
- Vessel design pressure
- 25 bar
- Cooling capacity
- 2 to 18 kW to cooling water
MATERIALS
- Vessel
- 1.4404 stainless steel shell
- Tubing and fittings
- 1.4404 coil, 10 m
- Cooling coil
- 1.4404 in a water jacket
- Seals
- Graphite
CONNECTIONS AND RATINGS
- Seal connections
- Two off G 1/2 to the seal chamber
- Instrument ports
- Temperature and vent
- Design temperature
- -20 to +260 °C
- Flush plan
- Plan 23, closed circuit
- Mounting
- Bracket on the pump
Stocked frame sizes.
| PART NUMBER | VOLUME | PRESSURE | PLAN | INSTRUMENTATION |
|---|---|---|---|---|
| VQ-SS310-10 | 2 kW | 25 bar | Plan 23, closed circuit | Thermometer pocket |
| VQ-SS310-20 | 8 kW | 25 bar | Plan 23, closed circuit | Thermometer pocket |
| VQ-SS310-30 | 18 kW | 25 bar | Plan 23, closed circuit | Thermometer and flow switch |
SS-310, DS-SS-310
The datasheet is issued with the selection rather than downloaded blind, so the figures that arrive are the ones for your duty point. Ask for it with the quotation and it comes back as a PDF.
What is in it
- Selection data and the limits each figure applies at
- Dimensional drawings for every size in the variant table
- Materials of construction and the compatibility notes
- Installation, commissioning and maintenance intervals
- Spare parts list with the part numbers
Elsewhere in the catalogue.
SE-120
Mechanical seal, shaft 16 to 100 mm, pressure to 16 bar.
SE-240
Mechanical seal, shaft 25 to 120 mm, pressure to 25 bar.
SE-360
Mechanical seal, shaft 25 to 100 mm, pressure to 40 bar.
SE-480
Mechanical seal, shaft 25 to 80 mm, pressure to 16 bar.
Quote the SS-310 for your duty.
Send the process data and the line size. The quotation comes back with the selection, the calculation and the lead time on the stocked variants.
Vanteq Industrial is a fictional company created for demonstration purposes. This product does not exist. The specifications, performance figures, materials and datasheet references on this page are illustrative and must not be used to select, size or buy equipment.