Series SS-120 Barrier Fluid Pot, Plan 52
VQ-SS120
Seal support system, volume 3 to 24 litres, pressure 10 bar.
- VOLUME
- 3 to 24 litres
- PRESSURE
- 10 bar
- TEMPERATURE
- -20 to +200 °C
- PLAN
- Plan 52, unpressurised
Why it is specified
A double seal without a barrier system is a double seal that fails twice. The pot, the tubing, the cooling coil and the instrumentation are quoted as one assembly against the seal it serves.
Typical applications
- Agitator seal support
- Double seals on aggressive duty
- Hot oil circulation seals
- Hygienic double seals
Options and executions
- Level switch with a contact
- Nitrogen regulator panel
- Pre-piped and tested as an assembly
- Pressure switch with a contact
The full table.
Figures cover the whole series. The variant table below narrows them to a part number.
PERFORMANCE
- Reservoir volume
- 3 to 24 litres
- Vessel design pressure
- 10 bar
- Cooling capacity
- Natural convection, with an optional coil
- Level indication
- Sight glass with a reflex column
MATERIALS
- Vessel
- 1.4404 stainless steel
- Tubing and fittings
- 1.4404, 12 mm compression
- Cooling coil
- 1.4404, 6 m, water cooled
- Seals
- FKM or graphite
CONNECTIONS AND RATINGS
- Seal connections
- Two off G 1/2
- Instrument ports
- Gauge, level switch and fill
- Design temperature
- -20 to +200 °C
- Flush plan
- Plan 52, unpressurised
- Mounting
- Wall or floor bracket
Stocked frame sizes.
| PART NUMBER | VOLUME | PRESSURE | PLAN | INSTRUMENTATION |
|---|---|---|---|---|
| VQ-SS120-10 | 3 litres | 10 bar | Plan 52, unpressurised | Sight glass |
| VQ-SS120-20 | 12 litres | 10 bar | Plan 52, unpressurised | Sight glass and gauge |
| VQ-SS120-30 | 24 litres | 10 bar | Plan 52, unpressurised | Gauge and level switch |
SS-120, DS-SS-120
The datasheet is issued with the selection rather than downloaded blind, so the figures that arrive are the ones for your duty point. Ask for it with the quotation and it comes back as a PDF.
What is in it
- Selection data and the limits each figure applies at
- Dimensional drawings for every size in the variant table
- Materials of construction and the compatibility notes
- Installation, commissioning and maintenance intervals
- Spare parts list with the part numbers
Elsewhere in the catalogue.
SE-120
Mechanical seal, shaft 16 to 100 mm, pressure to 16 bar.
SE-240
Mechanical seal, shaft 25 to 120 mm, pressure to 25 bar.
SE-360
Mechanical seal, shaft 25 to 100 mm, pressure to 40 bar.
SE-480
Mechanical seal, shaft 25 to 80 mm, pressure to 16 bar.
Quote the SS-120 for your duty.
Send the process data and the line size. The quotation comes back with the selection, the calculation and the lead time on the stocked variants.
Vanteq Industrial is a fictional company created for demonstration purposes. This product does not exist. The specifications, performance figures, materials and datasheet references on this page are illustrative and must not be used to select, size or buy equipment.