Series GK-110 Graphite Sheet Gasket
VQ-GK110
Gasket and packing, sizes DN15 to DN600, rating PN40.
- SIZES
- DN15 to DN600
- RATING
- PN40
- TEMPERATURE
- -200 to +450 °C
- MATERIAL
- Carbon steel
Why it is specified
Cut, stocked and labelled against the flange tables in this catalogue. A gasket is cheap until it is the reason a plant is down, so the material is chosen against the medium and the temperature, not against the drawer it came from.
Typical applications
- Flange joints on process lines
- Heat exchanger end covers
- Pump and valve covers
- Valve stem sealing
Options and executions
- Certificates for the material batch
- Cut to a drawing you supply
- Kits per flange table, boxed
- Stainless inner ring
The full table.
Figures cover the whole series. The variant table below narrows them to a part number.
PERFORMANCE
- Service
- General process, steam and hydrocarbons
- Maximum temperature
- -200 to +450 °C
- Maximum pressure
- to 40 bar
- Compressibility
- 40 per cent
MATERIALS
- Material
- Expanded graphite, 98 per cent pure
- Reinforcement
- 0.1 mm 1.4401 stainless foil
- Binder or filler
- None, pure graphite
- Finish
- Tanged both faces
CONNECTIONS AND RATINGS
- Sizes
- DN15 to DN600
- Flange standard
- EN 1092-1 and ASME B16.21
- Pressure rating
- PN40
- Thickness
- 1.0, 1.5, 2.0 or 3.0 mm
- Supply
- Cut rings or full sheets
Stocked frame sizes.
| PART NUMBER | SIZE | THICKNESS | MATERIAL | RATING |
|---|---|---|---|---|
| VQ-GK110-10 | DN25 | 1.5 mm | Carbon steel | PN40 |
| VQ-GK110-20 | DN150 | 2.0 mm | Carbon steel | PN40 |
| VQ-GK110-30 | DN600 | 3.0 mm | Carbon steel | PN40 |
GK-110, DS-GK-110
The datasheet is issued with the selection rather than downloaded blind, so the figures that arrive are the ones for your duty point. Ask for it with the quotation and it comes back as a PDF.
What is in it
- Selection data and the limits each figure applies at
- Dimensional drawings for every size in the variant table
- Materials of construction and the compatibility notes
- Installation, commissioning and maintenance intervals
- Spare parts list with the part numbers
Elsewhere in the catalogue.
SE-120
Mechanical seal, shaft 16 to 100 mm, pressure to 16 bar.
SE-240
Mechanical seal, shaft 25 to 120 mm, pressure to 25 bar.
SE-360
Mechanical seal, shaft 25 to 100 mm, pressure to 40 bar.
SE-480
Mechanical seal, shaft 25 to 80 mm, pressure to 16 bar.
Quote the GK-110 for your duty.
Send the process data and the line size. The quotation comes back with the selection, the calculation and the lead time on the stocked variants.
Vanteq Industrial is a fictional company created for demonstration purposes. This product does not exist. The specifications, performance figures, materials and datasheet references on this page are illustrative and must not be used to select, size or buy equipment.